Sifter BD150

BD 150 Sifter

For sifting wholegrain flour, our centrifugal pulsation sifter model BD-150 is an ideal completion to your stone mill as it ensures a high output with a very good quality.
See details
Sifters Engsko

FS1000 sifter

The FS 1000 sifter is developed to perform the final process of the decentralized flour milling plant. It is designed for separating ground flour in different fractions: Flour, Semolina and Bran. The Flour Sifter has three built-in-sifting chambers, each with an outlet. Furthermore, there is a remaining external outlet
See details
plan sifter fs 3000

Plan sifter FS 3000

The sifter operates similarly to the hand operated sieve. The product is fed through the opening in the board to the inlet sleeve, and passes through subsequent stack frames to be sized into fractions. Individual fractions are let out through sieve box channels to the lower frame and further to outlet sleeves and stub pipes. From here the product is led to further processing or for bagging off.
See details

Europemill Standard

The Europemill Standard horizontal mill is available in sizes 600, 800 or 950 mm.
See details


Here are some of the most common questions about Stone Milling

Yes, we have spare parts avaolable for our whole range of grinding mills, sifters and accessories

Stone Milling is a special craft so knowing how to mill with stone mills is a must. We offer training on site to all our customers

A Stone Grinding Mill can grind different types of grains, spices, and coffee. 

The product is ground between two millstones: a stationary stone and a runner stone.

Yes, not only is it healthy because it contains a natural balance of starch, protein, vitamins, and fibres, but it also preserves the essential vitamins B and E..

You can grind all types of grains, different types of spices and coffee on ENGSKO grinding mills

Yes, to all countries by air, sea and land

Yes, we have a full installation team that we will send out; both for installation, training and commissioning

The mill stone will last several years, depending on what you grind and how many hours per day you operate. 

As an overall, our mill stone will last up to 3 years before you need to change it. 

This is based on running the stones 8 hrs per day for 6 days per week. 

The millstone can be re-dressed up to 3-4 times

  • Our Baker´s Choice Milling Plant requires 30-50 sqm for operation.
  • Our Miller´s Choice 250 will require 75-100 sqm.
  • Our Miller´s Choice 500 will require 100-150 sqm.
  • Our Miller´s Miller´s Choice 1000 will require 150-200 sqm.

Almost there!

Fill in your details


Good solutions start with listening.

If you have any questions, please fill in your details, and we will be in touch as quickly as possible.