sifter bd 150

Description

For sifting whole meal flour, our centrifugal pulsation sifter model BD-150 is an ideal completion to your stone mill as it ensures a high output with a very good quality. The sifter is driven by a single phase 230 v, 0,88 kW electric motor, which is directly coupled with the shaft. It works efficiently and simply, and its dimensions fit our stone mill EM 25/250. The easily and quickly exchange sieves allow three different selections: one type of flour, fine bran and bran. The whole structure is in powder painted, welded steel. A rotor  operating by centrifugal pulsations is set up on dust-proof ball bearings. The sifter is coupled with three separate discharge outlets to sack each different type of flour and each discharge spout is supplied with nozzles and leather lacers

Specification

  • Ideal completion to your stone mill
  • UL/CSA approved motor

did you see our other products?

GET IN TOUCH?

engsko favicon

There are many imitations of our millstones, however, none of them match the quality of the original ENGSKO millstone. Therefor, look for the ENGSKO seal of quality cast in the back side of the stone. That is your quarantee for ENGSKO quality.

Our special design of the ENGSKO millstones is a result of practical experience gained during more than 100 years of production. They are produced in sizes from 250 mm to 1500 mm and composed of high-quality natural materials such as flint and emery.

The rest is our secret …

sifter bd 150

Description

The Discmill MHA 600 has many applications and is the heart of several ENGSKO milling plants. It can be used with finess to break open cereal grains suchs as wheat or it can be used with brute force to reduce granular products to fine flour or wholemeal flour. The Discmill MHA 600 is designed for a range of size reduction applications, particularly in the ceral grain milling industry and it bridges the gap between roller mills and hammer mills.
For each application the type of corrugation, relative disposition of the corrugation (sharp to sharp, dull to dull etc.), speed and motor size are selected by United Milling Systems, and the machine is supplied so configured.
The grinding discs in the mill can be adjusted on site, easily and accurately, by means of a micrometer handwheel. When the corrugated elements (tiles) are worn, or a different corrugation profile is required, the elements can be changed quite easily, it takes about one hour for one person.

Specification

  • Easy change of elements 
  • Depending upon the product and the desired granulation, the Discmill MHA 600 has a capacity of up to 2.000 kg per hour